SIM LINK · INSTALL AND TROUBLESHOOT
Set up Sim Link, and fix it when it stops
Every screen, step by step: installing on the sim PC, linking it to your account, what each page shows, and what to do when shots don’t arrive.
Install · Set up · Every day · Shots and Analysis · Troubleshooting · Questions

Install it on the sim PC
On the Windows PC that runs GSPro.
- 1Download it. Download SimLinkSetup.exe on the sim PC (or send it there: the app’s Sim Link page has the link).
- 2Open it. If Windows says it protected your PC, choose More info, then Run anyway. It installs in about ten seconds, for your Windows account alone, with no administrator password.
- 3Setup opens by itself. Five short steps, below. You can open them again any time from Settings.
Set up, step by step
Setup checks each link from GSPro to your drills, so when it finishes, shots flow.
1. Welcome
What setup will do: find GSPro, link this PC to your account, set your startup options and check everything with a test shot. Your password never goes on the PC: it gets a key of its own.

2. Find GSPro
Sim Link looks wherever GSPro is installed: every drive, its shortcuts and the GSPro that’s running. Found, it says where; Next. Not found? Choose location… and pick GSPro’s launcher (GSPLauncher.exe) or its desktop shortcut.

3. Approve this PC on your phone
Sim Link shows this PC’s code, here K7QM-4RXP, and its QR code. On your phone, scan the QR code, or type the code in the app (Profile ▸ Sim Link ▸ Link a PC), then tap Connect this PC. Signed in, the PC is linked to your account; as a guest, to that phone or browser. No phone? Open the approval page on the PC instead.



4. Startup options
Start when Windows starts: Sim Link waits by the clock, ready, whenever the PC is on. Off, open it from the Start menu when you play. Always show the notification area icon keeps its status by the clock. Install updates automatically keeps it current.

5. A test shot
Start GSPro with your launch monitor connected and hit one shot. Each link ticks green: GSPro running, the launch monitor connected, the shot received, and sent to your account. Finish, and you’re done.

Every day
Start GSPro as usual, open a drill on your phone, tablet or computer, and hit. Sim Link’s window is there when you want to look.




Shots and Analysis
Shots lists this session’s shots, or All my shots from your account. Click a heading to sort, type under it to filter (“iron”, “>150”, “140-160”), right-click a shot (or several) to set its club or mark it Not my shot, and Export to Excel. Analysis takes the shots shown, or the ones you select: pick a measure and group it by club, drill or day for a histogram, a dispersion view or box plots, and choose two groups for a t-test in plain words.


Dispersion shows each shot from above, left or right against carry, with each group’s average spot and the ellipse that holds most of its shots. Not my shot is left out unless you include it.
In the app
Open Sim Link in the app (Profile ▸ Sim Link, or a drill’s Sim button): whether your sim is on and GSPro is running, your PCs, your recent shots and the drill each went to, and the drills that log themselves. A drill listening shows a green Sim button in its header.

Troubleshooting
Most problems show on Sim Link’s Overview with a button that fixes them. Diagnostics checks every link, in order: the first one that isn’t green is the one to fix.
It’s waiting for approval
What you see: a yellow “Waiting for approval” with a code.
- 1Approve the PC. On your phone, scan the QR code or type the code in the app (Profile ▸ Sim Link ▸ Link a PC), then tap Connect this PC. Or select Open approval page on the PC.
- 2The code ran out? Codes last ten minutes. In Settings choose Link account for a new one.
- 3Linked to the wrong account? Settings ▸ Link to a different account.

GSPro isn’t running
What you see: “Waiting for GSPro”. Sim Link reads GSPro’s shots while it runs, or takes them straight from your launch monitor with GSPro closed.
- 1Start GSPro. With Start GSPro, or as you usually do.
- 2Connect your launch monitor. In its own software, connected to GSPro Connect, as you always do.
- 3Or play without GSPro. Point your launch monitor’s GSPro connection at this PC; see No shots with GSPro closed.

The launch monitor isn’t connected
What you see: GSPro running, but “Launch monitor not connected”: GSPro Connect stopped hearing from it.
- 1Check the launch monitor. On, ready, and connected in its own software (GSPro mode or its GSPro connector).
- 2Restart GSPro Connect. Close and reopen it, then hit a shot. Sim Link never talks to the launch monitor itself, so it can’t be the cause.

It can’t find GSPro
What you see: “GSPro not found”: no GSPro log where Sim Link looked.
- 1Start GSPro once. GSPro Connect writes its log the first time it runs; Sim Link notices.
- 2Or show it where. Locate GSPro (or Settings ▸ Choose location…) and pick GSPLauncher.exe or GSPro’s desktop shortcut, on any drive.


No shots with GSPro closed
What you see: your launch monitor is on, GSPro is closed, but no shots arrive in Sim Link.
- 1The switch. Settings ▸ Take shots without GSPro must be on (it is to start).
- 2GSPro fully closed. Sim Link stands in for GSPro only while none of GSPro’s programs runs, GSPro Connect included. Close them all, then wait a few seconds.
- 3The connection’s address. In your launch monitor’s software, its GSPro connection pointed at this PC: 127.0.0.1, port 921.
- 4Uneekor? No address to set: in Uneekor’s launcher start its GSPro connector (Third-party Connector) as usual, with GSPro closed. Sim Link takes GSPro’s place, so it needs Sim Link 3.8 or later.
- 5Another program on port 921 or 59002? Only one program can take each. Close any other GSPro bridge or connector app, then try again.

It’s offline
What you see: an orange “Offline”: the PC can’t reach your account. Shots wait on the PC, counted in the bar at the bottom.
- 1Check the internet. Open a website on the sim PC.
- 2Retry now. Shots waiting go at once; a drill still open picks up the last few minutes of them.
- 3A firewall, proxy or VPN? Let Windows PowerShell reach app.davidgolfs.com over HTTPS.

Shots don’t show in my drill
What you see: Sim Link says Sent, but the drill doesn’t log them. Tap the Sim button in the drill’s header: it checks each link from the PC to this drill and names the first that’s off.
- 1Same account. The drill must be signed in to the account the PC is linked to (or, as a guest, on the phone or browser that linked it).
- 2Session started. A drill takes shots once its session has started, and only shots hit after that.
- 3Not paused. Pause sim shots in the Sim button’s sheet, or Pause sending in Sim Link, holds them.
- 4Putting. Putt on GSPro’s Practice Area green: the app judges putts at its speed.

The app says my sim is off
What you see: the app’s Sim Link page says when the PC was last on. Sim Link isn’t running, or the PC is asleep.
- 1Open Sim Link on the PC. From the Start menu. To have it always ready, turn on Start when Windows starts in Settings.

Still stuck?
Open Diagnostics and select Copy diagnostic report, then paste it into an email to david@davidgolfs.com. It has everything we need to help, and never your password.
Questions
Where do I find Sim Link after setup?
In the Start menu and on the desktop, both called Sim Link. Opening it again while it runs brings its window forward. Its icon sits by the clock, perhaps behind the ^ arrow.
Do I need to keep the window open?
No. Closing the window keeps Sim Link running by the clock; shots keep flowing. Right-click its icon and choose Exit to stop it.
Can I link two PCs?
Yes, each with its own code. The app’s Sim Link page lists every PC you’ve linked, with Remove.
I got a new PC.
Install Sim Link on it and link it. Then remove the old PC on the app’s Sim Link page, so its shots stop coming.
Windows said it protected my PC.
SmartScreen shows that for new downloads. Choose More info, then Run anyway. Sim Link installs for your Windows account alone and never asks for an administrator password.
Does a firewall, proxy or VPN matter?
Sim Link needs to reach app.davidgolfs.com and our server over HTTPS (port 443), like a browser. If Diagnostics says the service is unreachable but your browser works, allow Sim Link (Windows PowerShell) through the firewall or VPN.
How do I send you a report?
Diagnostics ▸ Copy diagnostic report copies everything we need (versions, each check, the last errors, never your password). Paste it into an email to david@davidgolfs.com.
How do I uninstall it?
Windows Settings ▸ Apps ▸ Installed apps ▸ David’s Golf Drills Sim Link ▸ Uninstall. Then remove the PC on the app’s Sim Link page.
Ready to hit?
Install Sim Link on the sim PC, open a drill, and every shot logs itself.

